29.4V 2A Electric Scooter Charger (3 Plugs), Fast Universal Battery Replacement Charger for 25.2V Li-Batteries

Eythyfy only provides high-quality products, thank you for choosing us. The charger features the following specifications:

INPUT: 100-240VAC, 50/60Hz OUTPUT: CC-CV mode, 29.4V max, 2Amp max. Case: Fireproof ABS case, environmentally friendly. Indicator Lights: Red light means charging, Green light means battery is fully charged or disconnected. 3 different ports, compatible with most product models.

What you get: 129.4V 2A Lithium battery charger 1AC Power Cord with 5525 tip 1 5525 convert to mini 3 prong(8mm) connector 15525 convert to standard 3 prong(12mm) connector

True 2A without false label, faster than other chargers. Low energy consumption and high energy efficiency significantly reduce charging time.

STIO CHARGER 2.0A>1.7A>1.5A>1.2A>1A>0.8A>0.6A High-quality components, dual chip solution.

After the battery is fully charged, the charger automatically stops outputting, reducing current damage to the battery and extending battery life.

The indicator light shows the whole charging process: When the charger is connected to the power supply, the indicator light is green. After the interface is connected to the scooter, the indicator light changes from green to red. (If it still shows green, it is possible that the device is not successfully connected. Please confirm that the device is fully plugged in and has power on.) When the charger completes charging, the indicator light changes from red to green again. At this time, you can disconnect the charger and use your scooter.

Suptopone Smart Universal Charger 29.4V for 25.2V 25.9V Li-ion and 24V 25.6V LiFePO4 Battery Packs.

There may be the following reasons for the charger not working after connecting to the power supply: 1. The voltage and current of the charger do not match your battery. You have purchased a charger with the wrong parameters. Please tell us the brand and model of your electric bike or the parameters and plug of the original charger. 2. Due to the limited life of the lithium battery, the charger will not work if the battery is damaged. Your battery may be damaged if it is not used for more than 12 months or 2-3 months. 3. If the green light comes on when the power is turned on, but the LED light does not turn red after the battery is connected, the connector should be loose and in poor contact, and the plug can be re-inserted to maintain good contact. 4. If there is a green light when plugged into the power supply, and the light goes out after connecting the electric bicycle, it is because of the internal short circuit of the electric bicycle, which causes the charger to have a self-protection function. You'd better check your e-bike battery and replace it.

product information: